Phonitor xe的特点经过了改良，可将耳机放大功能最优化。它可以算作是 Phonitor e 的“哥哥”，单外形看起来更像旗舰款型号 Phonitor X。

Phonitor Matrix 与 Phonitor x 的matrix 是相同的，可以为耳机带来最真实的录音回放。

内置的先进双功率放大器可以使得耳机的平衡性能更好，二次放大标准的1/4英寸接口可以使录音的回放听起来更清晰更舒服。

点击下载快速启动指南       点击下载用户手册 

Phonitor xe

Phonitor是一个成功的设计。为了声音工程师可以在耳机上聆听混音而设计研发的Phonitor很快就在全世界范围内收货了一大批粉丝，因为他们发现竟然可以使用耳机也能享受到如此高品质的声音，完全不会受到超级立体声效果的影响，而且还带有自然的串扰。

对我们而言，为喜欢使用耳机聆听音乐的人们研发优化HiFi版产品知识一个理性的行为。

和 Phonitor x 比较起来，Phonitor xe 放弃了前置放大器功能。与 Phonitor e 不同，它具有漂亮的VU 表和功能齐全的 Phonitor 矩阵。

 Phonitor xe 对耳机爱好者来说是一款旗舰产品。

平衡耳机的双功率放大器

平衡耳机可以被连接至 4-针 XLR 插口。Phonitor xe 带有一个内置的先进平衡双功率放大器has a built-in advanced dual power amp that drives headphones balanced with twice the power of the standard 1/4" jack.

This tightens the bass response and makes the overall playback even more relaxed and transparent. Both the standard and the 4-pin headphone outputs can be used simultaneously.

前后面板上的耳机输出

he Phonitor xe features both balanced and standard headphone output sockets on the front and on the back.

Permanently connected headphones can be put in the rear sockets so that the headphone cable does not get in the way and disturb the look.

A switch on the front allows to toggle between front and rear outputs. This also allows you to compare headphones without plugging and unplugging.

优化的Phonitor Matraix

The Phonitor Matrix is identical to the Phonitor x and purely designed for audio playback.

Unlike the professional version Phonitor 2, features like Center Level, Solo and Polarity are renounced in the Phonitor xe as they are only of use in music production.

串扰

The Crossfeed switch allows you to adjust the frequency-dependent crossfeed simulation of both channels by adjustments of interaural level difference ? as if this characteristic would be heard from monitors when in their own room ambience. One can compare variations in crossfeed values as approximating the influence of different room sizes and characteristics on a given loudspeaker setup.

This adjustment can be made in six steps ranging from “minimum” to “maximum”. Crossfeed interacts with the Angle value to simulate the width of a stereo image.

角度

The Angle switch provides for frequency-dependent simulation of your stereo image width by adjustments of interaural time difference. This influences the moment in time at which a signal’s wave form arrives at the ear and corresponds to a particular variation in the angle of an actual loudspeaker pair.

The time constants of the interaural time differences between the left and right channels occur within a range of 90 to 635 microseconds. As a starting value select the 30° position.

遥控

To control the Volume you can use any IR remote control. The cool part is that the Phonitor xe learns your remote!

You can use the remote control of your CD player for instance. There are many buttons and there are at least two you don’t really need. Assign Volume Up and Volume Down to those buttons and let the Phonitor xe learn them. Please check the manual for more.

可选配件DAC768

The Phonitor xe can be equipped with the Uber-DAC768.

With that installed, the available inputs are expanded by USB, AES/EBU, coaxial and optical digital stereo inputs.

The DAC768 converts PCM sample rates up to 768 kHz with 32 bits and DSD streams up to DSD256. It syncs automatically to the sample rate of the selected digital input.

Compared to the DAC192 the DAC768 adds DSD playback and supports higher sample rates for PCM signals. The bit depth is increased from 24 bit to 32 bit for an unparalleled dynamic range. The Current -To-Voltage as well as the Lowpass-Filter are both built in a 120V-Voltair-Technology ? just like it is done in the Director DAC & Preamplifier.

XLR 输入

• Neutrik XLR, 平衡的, Pin 2 = (+)
• 抗阻: ca. 20 kohms
• CMR: -82 dBu (at 1 kHz)
• 最大输入电平l: +32.5 dBu

RCA 输入

• RCA, 不平衡的（单结尾）
• 抗阻: ca. 10 kohms
• 最大输入电平: +32.5 dBu

数字输入（可选）

• 同轴 SPDIF (RCA) - 采样率 PCM (kHz): 44.1, 48, 88.2, 96, 176.4, 192
• 可选 TOSLINK (F06) - 采样率 PCM (kHz): 44.1, 48, 88.2, 96
• USB (B) - PCM 采样率 (kHz): 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384, 705.6, 768
• USB (B) - DSD 1, 2 and 4 (DoP)
• AES- 采样率 PCM (kHz): 44.1, 48, 88.2, 96, 176.4, 192

<span style="font-family: "Microsoft YaHei";font-size:small;">

<span style="font-family: "Microsoft YaHei";font-size:small;">平衡耳机输出

• Neutrik 4-pin XLR connector
• Pin wiring: 1= L (+), 2= L (-), 3= R (+), 4= R (-)
• 抗阻: 0.36 ohms
• 阻尼因数: 180 @ 40 ohms
• 频率范围: 10 Hz to 300 kHz ( -3 dB)
• 串扰 at 1kHz: -90 dB
• THD & N: 0.00082 % (at 0 dBu, 1kHz, 100 kohms load)
• 噪音 (A-weighted): -98 dBu
• 动态范围: 130.5 dB

不平衡耳机输出

• 6.35 mm TRS connector
• Pin wiring: Tip = Left, Ring = Right, Sleeve = GND
• 抗阻: 0.18 ohm
• 衰减因数: 180 @ 40 ohms
• 频率范围: 10 Hz to 300 kHz ( -3 dB)
• 串扰 at 1kHz: -90 dB
• THD & N: 0.00082% (at 0 dBu, 1 kHz, 100 kohms load)
• 噪音 (A-weighted): -103 dB
• 动态范围: 135.5 dB

最大输出功率 (at +30 dBu @ 1 kHz)

• 2 x 1 W at 600 Ohm 抗阻
• 2 x 2 W at 300 Ohm 抗阻
• 2x 3.7 W at 120 Ohm 抗阻
• 2x 2.9 W at 47 Ohm 抗阻
• 2x 2.7 W at 32 Ohm 抗阻

内部操作电压

• 模拟: +/- 60 V
• 数字: + 5 V and + 3,3 V (optional DAC768)

<span style="font-family: "Microsoft YaHei";font-size:small;">

<span style="font-family: "Microsoft YaHei";font-size:small;">电源

• 主电压（可切换）: 230 V AC / 50 Hz 或 115 V AC / 60 Hz
• 保险丝: 230 V: T 500 mA; 115 V: T 1 A
• 能量功耗: max 40 VA
• 待机功耗: 0.7 W

体积

• 278 mm W x 100 mm H x 330mm D

• 5,1 kg，单独设备
• 6,25 kg，包装箱